How to put out a fire, the answer to this question is something that we all must know. Fire safety hazards have the potential to cause catastrophic damage, however, this can be prevented if the proper safety guidelines are followed.
Knowing when to stop a fire can be just as important as knowing how to stop one, so we recommend reading this article so that you may get a better understanding of the topic.
To start off the first thing that you must know is that there are different types of fires and depending upon the origin of the fire, the exact method to put it out can vary. For example, an electrical fire could require drastically different methods to put out as compared to a grease fire.
In simple words, all fires are not the same. Let’s go over the basic causes of fires and how to put them out.
Electrical fires can be super hard to put out, water is a big no-no in this type of fire as you can probably imagine so what can you do. Well, the best option would be to contact the fire department, electrical fires are quite dynamic in nature and require a lot of work to put out.
Microwaves can catch on fire if they are not properly ventilated. the plugs can also melt if there is a problem with the connection. if such a case occurs you can use a fire extinguisher. unplugging the microwave is also necessary.
If your oven catches on fire then firstly you need to cut off the supply to it, unplug it and seal the door. If the flames don’t die down then use a fire extinguisher. if the fire still continues to expand then call the fire department immediately.
If the air vents are covered then the TV can heat up and autoignite itself, albeit that is a rare phenomenon. Follow the same basic guidelines for this as well. Unplug the switch, use a fire extinguisher if necessary and call the fire department if the flame continues to grow.
4) Other appliances:
So it’s best that you let professionals handle this. However, if you ever have to do it than a fire extinguisher can work, we have a separate guide on the best ones available on the market so be sure to check that out.
Generally, there are certain guidelines that you should also follow for reducing the chances os further damage and trying to control the fire. Unplugging the fire can be very beneficial, but to remove the plug completely it is absolutely necessary that you do it in a manner that doesn’t put you in any form of threat.
Most fires can be caused by the plug themselves, so in such a case do not approach the plug instead use a multipurpose fire extinguisher to reduce the ferocity of the flames.
Sometimes disconnecting the supply of electricity can be crucial, if the plug is on fire and you can’t then you can cut off the electricity of your house entirely by using the main circuit board. Again only do this if it is safe to do so, you do not need to go out of your way to cut off the supply.
Grease fires are actually more common than most people think, they originate in the kitchen and can be really hard to put out. Once again water can’t be used as it can spread the fire more so just remember never to use water with grease fires it can be very dangerous.
1) Cutting of the Oxygen supply:
The best course of action you can take is to cut off the oxygen supply of the fire and doing so is actually quite simple all you have to do is put a lid on the fire after you have closed the fire source, it will automatically die down.
2) Using a Fire Extinguisher:
A fire extinguisher can also work great in this environment, so it’s best to keep a fire extinguisher around the house at all times. Especially the kitchen, this is the most obvious point of origin for most house fires and hence must be the most controlled area in the entire building.
3) Using baking soda:
Baking soda, although this may seem like an odd choice it can actually work surprisingly well in the case of a grease fire. Just throw a good amount of baking soda on the fire and it should slow down automatically. You can also replace the baking soda with salt.
Also, keep in mind that there are some other products that can actually increase the intensity of the flame so it’s best that you stay away from them. Most notability flour, since it has a similar powdery texture. Throwing this instead of baking soda can increase the intensity so be extra careful when using baking soda to eliminate the fire.
Whether you’re using a gas-based grill or any other thing that requires gas as a source of fuel, you need to be extra cautious. Not only can a leakage occur but sometimes the gas cylinder can also burst into an explosion. Especially since the cylinder or the source is near the fire, you have to be extra careful that you’re following proper guidelines.
1) Turn off the supply:
So how to put out a fire that originated from a gas source. If it’s inside the house and you’re not using a cylinder but instead the gas from the house supply then try to contain it by turning off the source.
In some situations, that can’t is possible so in such a scenario you would have to call the natural gas sourcing company to switch it off. It may take time, but in order to control the fire it the fuel needs to be disconnected from the flame.
2) Use a Fire Extinguisher:
Water can’t be used here, however, depending upon the material that is on fire, water can be used if the fuel has been cut off. A fire extinguisher can be a great choice in these types of fire as well.
3) Call the Fire Department:
If the flame hasn’t expanded yet and is just beginning to grow then using a fire extinguisher or any other of the above-mentioned methods can be used.